Horn

This complete HIGH-QUALITY KIT for the assembly and operation of a single and double horn.

The kit contains:

• 1 24V solenoid valve with mounting bracket.
• 8 mm and associated coupling parts.
• T-piece with connection pieces to the horns.
• Mounting hardware for horns.

NO air lines are supplied with this kit.

Trumpet Basuri 12v-24v

The horn has 12 tones and 2 horns

For buses, lorries and heavy vehicles

maximum pressure: 11 bars

Decibel: 130db (audible at 3 or 4km)

6mm connection for air hose

Trumpet Basuri 12v-24v

The horn has 19 sounds, including baby shark and 6 horns

maximum pressure: 11 bars

For buses, lorries and heavy vehicles

Decibel: 120db (audible at 3 or 4km)

6mm connection for air hose

Listen to the sounds

This control box allows new songs to be played without the need for an additional horn

It can be mounted on 12/24v power supplies

It is compatible with all types of vehicle, including trucks, tractors and cars.

Listen to the sounds

Trumpet Basuri 12v-24v

The horn has 19 sounds, including baby shark and 6 horns

maximum pressure: 11 bars

For buses, lorries and heavy vehicles

Decibel: 120db (audible at 3 or 4km)

6mm connection for air hose

Listen to the sounds

snow cap for truck trumpets Hadley

125mm diameter polished shield

in stainless steel

snow cap for truck trumpets Hadley

180mm diameter polished shield

in stainless steel

950mm diameter 185mm brass truck air horn

This is the longest horn onHadley with a strong but pleasant low tone

For this air horn you will need an air source with valve (solenoid) and a tube that produces at least 4 to 8 bars of pressure

To ensure optimum sound and to make fitting the air horn as simple as possible, we recommend our connection kit, which contains..:

Stand for K8330HAD

950mm support foot

Truck air horn with two horns of 390mm and 230mm

In order to guarantee optimum sound and to mount the air horns easily, we recommend our connection kit which contains:

Rectangular brass truck air horn 660mm and 26 inches

For this air horn you will need an air source with valve (solenoid) and a tube that produces at least 4 to 8 bars of pressure

To ensure optimum sound and to make fitting the air horn as simple as possible, we recommend our connection kit, which contains..:

735mm and 29 inch rectangular brass truck air horn

For this air horn you will need an air source with valve (solenoid) and a tube that produces at least 4 to 8 bars of pressure

To ensure optimum sound and to make fitting the air horn as simple as possible, we recommend our connection kit, which contains..:

490 mm brass truck air horn with 127 mm diameter

For this air horn you will need an air source with valve (solenoid) and a tube that produces at least 4 to 8 bars of pressure

To ensure optimum sound and to make fitting the air horn as simple as possible, we recommend our connection kit, which contains..:

560mm steel truck air horn with 125mm diameter

In order to guarantee optimum sound and to mount the air horns easily, we recommend our connection kit which contains:

620 mm brass truck air horn with 152 mm diameter

For this air horn you will need an air source with valve (solenoid) and a tube that produces at least 4 to 8 bars of pressure

In order to guarantee optimum sound and to mount the air horns easily, we recommend our connection kit, which contains..:

Support foot for K8130HAD and K8230HAD

Measures 490mm/560mm

The original Hi Do Turkish whistle in a 12-volt version. The whistle is supplied without the compressor and mounting hardware

voltage: 12 volts

sound: 120-125db

consumption: 3A

frequency: 400hz

The original Hi Do Turkish whistle in a 24-volt version. The whistle is supplied without the compressor and mounting hardware

voltage: 24 volts

sound: 120-125db

consumption: 3A

frequency: 400hz

Minimum 3 bar and maximum 8 bar

Marco 12V compressor

12v compressor in reinforced version

voltage: 12v

Power consumption: 20A

pressure:1.1 bar

motor power:240w

dimensions: 116mmx74mmx78mm

approval: R10 ECE

IP44

12v compressor in white reinforced version

voltage: 12v

Power consumption: 20A

pressure:1.2 bar

motor power:240w

dimensions: 116mmx74mmx78mm

approval: R10 ECE

IP44

model also available in 24v

special electric valve with fittings for Ø 8 mm outer hose

Suitable for mounting two trumpets/horns in pairs

also available in 24v

Compressed-air horn with two interval tones and a 24V single-tone device

has electric valves and an electronic interval timer.

Chromed metal horn

Mounted on bottom of bonnet

Dimensions: 388mm long, 80mm diameter

model also available in 12v

Marco 24V compressor

Compressed-air horn with three interval tones and 12v single-tone device

has electric valves and an electronic interval timer.

Chromed metal horn

Mounted on bottom of bonnet

Dimensions: 388mm long, 80mm diameter

model also available in 24v

Compressed-air horn with three interval tones and 24V single-tone device

has electric valves and an electronic interval timer.

Chromed metal horn

Mounted on bottom of bonnet

Dimensions: 388mm long, 80mm diameter

model also available in 12v

Compressed air horn with 7 tones in 12v

The horn includes electric valves and an electronic intervaler.

3 chromed metal horns 390mm long and 80mm in diameter

Mounted on the bottom of the bonnet

model also available in 24v

Compressed air horn with 7 sounds in 24v

The horn includes electric valves and an electronic intervaler.

3 chromed metal horns 390mm long and 80mm in diameter

Mounted on the bottom of the bonnet

model also available in 12v

Compressed air horn with two interval tones and a 12v single-tone device

has electric valves and an electronic interval timer.

Chromed metal horn

Mounted on bottom of bonnet

Dimensions: 388mm long, 80mm diameter

model also available in 24v

black plastic spoiler with horn

The horn has a solenoid valve and is mounted at the bottom of the bonnet

Pneumatic horn producing 123db

model available with double horn and 24v

To ensure optimum sound quality and to make fitting the air horns as simple as possible, we recommend our connection kit, which contains..:

black plastic horn with 24v horn

The horn has a solenoid valve and is mounted at the bottom of the bonnet

Pneumatic horn producing 123db

model available with double horn and 12v

To ensure optimum sound quality and to make fitting the air horns as simple as possible, we recommend our connection kit, which contains..:

Black plastic horn with two 12v horns

The horn has a solenoid valve and an electronic interval timer of approximately 300 cycles per minute with a device for obtaining a unified sound

The horn is mounted on the bottom of the bonnet

A pneumatic horn producing 123db

model available in single horn and 24v

In order to guarantee optimum sound and to mount the air horns easily, we recommend our connection kit which contains:

Black plastic horn with two 24v horns

The horn has a solenoid valve and an electronic interval timer of approximately 300 cycles per minute with a device to obtain a unified sound

The horn is mounted on the bottom of the bonnet

A pneumatic horn producing 123db

model available in single horn and 12v

In order to guarantee optimum sound and to mount the air horns easily, we recommend our connection kit which contains:

Chrome-plated brass trumpet, 600 mm long and 160 mm in diameter

Pneumatic horn producing 120db

model available in 600mm, 680mm and 750mm

To ensure optimum sound and to make fitting the air horns as simple as possible, we recommend our connection kit, which contains the following items

Chrome-plated brass trumpet 680 mm long and 160 mm in diameter

Pneumatic horn producing 120db

model available in 600mm, 680mm and 750mm

To ensure optimum sound quality and to make fitting the air horns as simple as possible, we recommend our connection kit, which contains..:

Chrome-plated brass trumpet 750 mm long and 160 mm in diameter

Pneumatic horn producing 120db

model available in 600mm, 680mm and 750mm

In order to guarantee optimum sound and to mount the pneumatic horns easily, we recommend our connection kit, which contains..:

12v electric air horn for outdoor use

Kit includes electric compressor, relay, hose and mounting accessories.

The horn is made of chrome-plated brass

Particularly suitable for installation on vans, motorhomes, 4x4s and small trucks

Dimensions: 500 mm long and 120 mm diagonal

Voltage: 12V

Absorption: 18A

model also available in 24v

24V electric air horn for outdoor use

Kit includes electric compressor, relay, hose and mounting accessories.

The horn is made of chrome-plated brass

Particularly suitable for installation on vans, motorhomes, 4x4s and small trucks

Its dimensions are 500 mm long and 120 mm diagonal

It produces 111 decibels

Voltage: 24v

Absorption: 9A

model also available in 12v

Electric air horn with two alternating-tone 12V horns

Horn measures 390mm in length and 80mm in diameter

Kit includes electric compressor, relay, hose and mounting accessories

Chromed metal horn

model also available in 24v

Electric air horn with two alternating-tone 24V horns

Horn measures 390mm in length and 80mm in diameter

Kit includes electric compressor, relay, hose and mounting accessories

Chromed metal horn

model also available in 12v

Electric steel horn with 5 horns

Diffuses the cucaracha sound

set includes electric compressor, relay, hose and mounting accessories

12v air horn

High-powered horn with a powerful, deep sound

Xtrème Blast is the most powerful two-tone horn in its class.

It uses two electric compressors to ensure the correct level of sound pressure is always maintained at each of the two horns

It can be installed on any type of vehicle

Consists of two high-resistance compressors with two chromed metal horns

Comes complete with relay, air hoses and mounting accessories

model also available in 24v

24v pneumatic horn

Dimensions are 390mm long and Ø 80mm

High-powered horn with a powerful, deep sound

Xtrème Blast is the most powerful two-tone horn in its class.

It uses two electric compressors to ensure the correct level of sound pressure is always maintained at each of the two horns

It can be installed on any type of vehicle

Consists of two high-resistance compressors with two chromed metal horns

Comes complete with relay, air hoses and mounting accessories

model also available in 12v

Compact electropneumatic 2-tone horn with high sound power of 12v

The horn has a built-in compressor that allows the sound to be emitted immediately when the button is pressed

No need to wire the air hose.

Quick assembly with a single fixing point

dimensions are 136X115X91mm

voltage is 12v

Absorption is 20A

the fuse is 25A

decibels are 112db

Compact electropneumatic 2-tone horn with high sound power of 24v

The horn has a built-in compressor that allows the sound to be emitted immediately when the button is pressed

No need to wire the air hose.

Quick assembly with a single fixing point

dimensions are 136X115X91mm

voltage is 24v

Absorption is 20A

the fuse is 25A

decibels are 112db

model also available in 12v

Hand valve with straight M10X1 threaded connection for direct connection to horn base.

Fitting for 6 mm diameter hose

Hand valve with straight M10X1 threaded connection for direct connection to horn base.

Fitting for 8 mm diameter hose

special electric valve with fittings for Ø 8 mm outer hose

Suitable for mounting two trumpets/horns in pairs

also available in 12v

Compressed air horn for outdoor mounting with chrome cover

Stainless steel horn, supplied with mounting accessories and protective cover.
Sold without solenoid valve.

Length 630 mm, diameter 140 mm

Original train whistle, made of chromed brass

Operates on compressed air of at least 8 bars

Includes stainless steel mounting bracket

Connections for 8mm OD hose

Does not have a control valve

product 112 decibel

Stainless steel trumpet, 650 mm long and 140 mm in diameter

Pneumatic horn producing 120db

Mounting hardware included with 8mm air connection

In order to guarantee optimum sound and to mount the pneumatic horns easily, we recommend our connection kit which contains:

Stainless steel horn, 550 mm long and 140 mm in diameter

Pneumatic horn producing 120db

Mounting hardware included with 8mm air connection

In order to guarantee optimal sound and to mount the pneumatic horns in a simple way, we recommend our connection kit which contains:

Stainless steel trumpet 750 mm long and 140 mm in diameter

Pneumatic horn producing 120db

Mounting hardware included with 8mm air connection

In order to guarantee optimum sound and to mount the pneumatic horns easily, we recommend our connection kit which contains:

Stainless steel trumpet 950mm long and 180mm in diameter

Pneumatic horn producing 122db

Mounting hardware included with 8mm air connection

In order to guarantee optimum sound and to mount the pneumatic horns easily we recommend our connection kit which contains:

Black brass air horn 950 mm long and 180 mm in diameter

Pneumatic horn producing 120db

In order to guarantee optimum sound and to mount the air horns easily, we recommend our connection kit, which contains:

The sound of grover" brass trumpet, 950 mm long and 180 mm in diameter

A pneumatic horn producing 120db

In order to guarantee optimum sound and to mount the pneumatic horns easily, we recommend our connection kit which contains:

Rubber horn Nedking for trumpet

Pull cord valve for pneumatic horns

6mm valve

SEGER TURBO TGV trumpet in black aluminium.

Alternating sound: 1 high tone, 1 low tone

The trumpets operate on 12V.

It has a sound and a high quality level.

Sound level: 125dB.

Air source: 6kg/cm².

Dimensions: 393x301x170.
Minimum air pressure: 6 Bars

SEGER TURBO TGV trumpet in black aluminium.

The trumpets operate on 24V.

It has a sound and a high quality level.

Sound level: 125dB.

Air source: 6kg/cm².

Dimensions: 393x301x170.