List of products by brand METEC

Spoiler bar model F-Liner for Mercedes Actross from 2011 onwards

The bar has 5 white and two orange position lights

The bar is made of stainless steel with a gloss finish

Installation is done according to the model, no need to drill or weld, only ordinary tools are needed for installation

Please note that the bar is not suitable for low-deck models

Roof bar for Volvo FM Globetrotter 2014-

The bar is made of stainless steel with a bright finish.

Its diameter is 60 mm.

It has 6 lighting brackets and the necessary wiring to power 6 lights.

The bar is fitted with 5 white position lights.

The maximum distance between each light must be 245mm.

Brace-It side bar for Ford F-Max 20-...

Side bar is 3600mm long

The bar has 5 orange position lights

Side bar is 60mm diameter

The bar is in stainless steel with a polished or black finish

The bar meets UNECE R26/R61 approval standards

Buffalo headlamp for Scania G from 2016-... mini model

The buffalo bumper is compatible with the low bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is made of polished stainless steel

The products are valid in accordance with the UNECE R26/R61 legislation.

Buffalo headlamp for Scania G from 2016-... mini model

The buffalo bumper is compatible with the medium bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is made of polished stainless steel

The products are valid in accordance with the UNECE R26/R61 legislation.

Buffalo headlamp for Scania R from 2016-... mini model

The buffalo bumper is compatible with the low bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is made of polished stainless steel

The products are valid in accordance with the UNECE R26/R61 legislation.

Buffalo headlamp for Scania R from 2016-... mini model

The buffalo bumper is compatible with the medium bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is made of polished stainless steel

The products are valid in accordance with the UNECE R26/R61 legislation.

Buffalo headlamp for Scania S from 2016-... mini model

The buffalo bumper is compatible with the low bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is made of polished stainless steel

The products are valid in accordance with the UNECE R26/R61 legislation.

Buffalo headlamp for Scania S from 2016-... mini model

The buffalo bumper is compatible with the medium bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is made of polished stainless steel

The products are valid in accordance with the UNECE R26/R61 legislation.

Buffalo guard for Volvo FH from 2013.

The bars are made of stainless steel with a bright finish.

Diameter: 76mm.

Total weight: 62kg.

Assembly time: 60min.

Radar compatible.

It has 4 fixed lamp holders.

Mini Buffalo Screen for Volvo FH 2013-2020

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is made of polished stainless steel

Model compatible with towing unit and radars

Products are valid in accordance with UNECE R26/R61 legislation.

Buffalo guard for Mercedes Actros cab 2500mm from 2011.

The bars are made of stainless steel with a bright finish.

Diameter: 76mm.

Total weight: 55.70kg.

Assembly time: 60min.

This buffalo guard is compatible with the radar and the towing unit.

Mega Buffalo Screen for Man TGX 2007-20

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is in polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

Nordic buffalo screen for Renault T series 21

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo screen is in polished stainless steel

This buffalo screen is compatible with radar and the towing unit.

The products are valid in accordance with UNECE R26/R61 legislation.

Buffalo Mega screen for Mercedes Actros 11-... L cab

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is in polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

This buffalo screen is compatible with radar and the towing unit.

Mini buffalo guard for Volvo FH 2020 and more

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is made of polished stainless steel

Model compatible with towing unit and radars

Products are valid in accordance with UNECE R26/R61 legislation.

Standard buffalo guard for Man TGX 2020 and later from Metec

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is made of polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

Standard buffalo screen for Man TGS 2007-20

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is in polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

Buffalo headlamp for Scania G from 2016-... wing model

The buffalo bumper is compatible with the XT bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is in polished stainless steel

Products are valid in accordance with UNECE R26/R61 legislation.

Buffalo headlamp for Scania P from 2016-... wing model

The buffalo bumper is compatible with the XT bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is in polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

Buffalo headlamp for Scania R from 2016-... wing model

The buffalo bumper is compatible with the XT bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is in polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

Buffalo headlamp for Scania S from 2016-... wing model

The buffalo bumper is compatible with the XT bumper

The buffalo bumper is 1.6 metres high and 2.35 metres wide

The buffalo bumper is in polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

Mega Buffalo Screen for Volvo FH 20-...

The buffalo guard is 1.6 metres high and 2.35 metres wide

The buffalo guard is made of polished stainless steel

The products are valid in accordance with UNECE R26/R61 legislation.

This bull bar is radar and towing unit compatible.

grille support for Scania truck P 16-.. model Tailor

It has 4 lighting brackets and the wiring required to power 4 lights.

The bar is made of stainless steel with a shiny finish

The bar is 60mm in diameter

The grille bar is UNECE R26/R61 approved

grille support for Scania truck P 16-.. model Tailor

It has 2 built-in orange flash units, 4 wristband lighting brackets and the wiring needed to power 4 lights.

The bar is in stainless steel with a shiny finish

The bar is 60mm in diameter

The grille bar is UNECE R26/R61 approved

grille support for Scania R 16-.. Tailor model truck

This bar has 4 lighting brackets and the wiring required to power 4 lights.

The bar is made of stainless steel with a shiny finish

The bar is 60mm in diameter

The grille bar is UNECE R26/R61 approved

grille support for Scania S 16-... Tailor model truck

It has 2 built-in orange flash units, 4 wristband lighting brackets and the wiring needed to power 4 lights.

The bar is in stainless steel with a shiny finish

The bar is 60mm in diameter

The grille bar is UNECE R26/R61 approved

Grille bar with integrated position lights for Iveco S-Way

The Grille bar has 4 bracelet lighting supports and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish.

The grille bar is UNECE R26/R61 approved

grille support for Renault T series 14-20 City model truck

This bar is equipped with 2 orange flash units, 4 lighting bracelets and the wiring needed to power 4 lights.

The bar is in stainless steel with a shiny finish

The bar is 70 mm in diameter

The grille bar is UNECE R26/R61 approved

Grille bar with integrated Flash for Iveco S-Way 2019-...

The grille bar has 2 integrated flash units, 4 lighting bracelets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is compatible with the towing ring

The grille bar is UNECE R26/R61 approved

Radiator grille support for Iveco S-Way 2019-...

Grille bar for Mercedes Actros trucks from 2011 onwards.

The grille bar has 4 lighting brackets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is UNECE R26/R61 approved

City grille support Mercedes Actros 11-... with flash

Grille bar for Mercedes Actros trucks from 2011 onwards.

The grille bar has 2 orange flashes, 4 lighting bracelets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is UNECE R26/R61 approved

Grille bar for Mercedes Actros truck from 2011 onwards.

The grille bar has 2 orange flashes, 4 lighting bracelets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is UNECE R26/R61 approved

Front Grille Bar for Mercedes Actros Trucks from 2011 onwards.

The grille bar has 3 white position lights, 4 lighting brackets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is UNECE R26/R61 approved

Grille bar for Mercedes Arocs truck from 2014 and up.

The grille bar has 4 lighting brackets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is UNECE R26/R61 approved

Grille bar for Mercedes Arocs from 2014 and up.

The grille bar has 2 orange flashes, 4 lighting bracelets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of shiny stainless steel

The grille bar is UNECE R26/R61 approved

Grille bar for Mercedes Arocs truck from 2014 and up.

The grille bar has 3 white position lights, 4 lighting brackets and the necessary wiring to power 4 lights.

The bar is 70mm in diameter

It is made of stainless steel with a shiny finish

The grille bar is UNECE R26/R61 approved

grille support for Renault T series 14-20 City model truck

This bar has 4 lighting brackets and the wiring required to power 4 lights.

The bar is made of stainless steel with a shiny finish

The bar is 70 mm in diameter

The grille bar is UNECE R26/R61 approved

grille support for Renault T 14-20 series City model truck

It has 3 white position lights, 4 lighting brackets and the wiring needed to power 4 lights.

The bar is in stainless steel with a gloss finish

The bar is 70 mm in diameter

The grille bar is UNECE R26/R61 approved