List of products by brand LEDSON

dual Eye S 10W high beam from Ledson

dual Eye S long range high beam has a beam type: spot

The range of the Ledson Dual Eye S high beam is 1 lux at 161m

The Ledson Long Range high beam has a luminous flux of 426lm and a luminous temperature of 6000K

Dimensions of the Dual Eye S high beam:

1. width: 93mm
2. Height with bracket: 61mm
3. Height without bracket: 50mm
4. Depth: 60mm

ECE R10 and IP67 approved

Ledson DualEye F 10W work light

Ledson DualEye F worklight is easy to install when space is limited

The DualEye F worklight from ledson has a range of 1 lux at 53m

The DualEye F worklight from ledson has a luminous flux of 426lm and a luminous temperature of 6000K

Power: 10W

Dimensions of the DualEye F worklight from ledson:

1. Length: 93mm
2. Height: 61mm
3. Depth: 60mm

ECE R10 and IP67 approved

Note: The DT connector must not be cut for warranty reasons

LED H1 conversion kit LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

LED H13 conversion kit LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

LED H3 conversion kit LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

LED H4 conversion kit LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

Halogen bulb Xenonlook blue 24v

The Ledson bulb socket is H1

The Ledson halogen bulb has a light temperature of 5000K

The Ledson bulb is suitable for high beam, low beam and fog lights

e-approved for use on the road

sold in packs of 2

Xenonlook blue 24v halogen bulb

socket: H11

colour 5000k

suitable for high beam, low beam and fog light

e-approved for road use

sold in packs of 2

Halogen bulb Xenonlook blue 24v

The Ledson bulb socket is H3

The Ledson halogen bulb has a light temperature of 5000K

The Ledson bulb is suitable for high beam, low beam and fog lights

e-approved for use on the road

sold in packs of 2

Halogen bulb Xenonlook blue 24v

The Ledson bulb socket is H4

The Ledson halogen bulb has a light temperature of 5000K

The Ledson bulb is suitable for high beam, low beam and fog lights

e-approved for use on the road

sold in packs of 2

Ledson Halogen bulb Xenonlook blue 24v H7

This blue halogen bulb is specially designed for commercial vehicles, trucks and buses equipped with a 24-volt electrical system. It provides a bright, clear light that greatly improves your vehicle's visibility on the road.

Advanced technology for brighter light

The Ledson Xenonlook halogen bulb uses advanced technology to provide a brighter light, similar to that of xenon headlights. This Xenonlook technology produces a whiter, brighter light, which improves visibility on the road.

Longer life

Thanks to its superior quality, this halogen bulb lasts longer than standard halogen bulbs. This makes it a cost-effective choice for commercial vehicle owners looking to replace their bulbs on a regular basis.

Easy to install

The Ledson Xenonlook halogen bulb is easy to install and can be used with most 24-volt electrical systems. The H7 plug makes installation quick and easy.

An approved bulb for road legal use

This halogen bulb is E marked, which means it's road legal and safe to use on public roads.

So if you're looking to improve your vehicle's visibility on the road with a high quality halogen bulb, the Ledson Xenonlook 24V H7 bulb from Ducheminag is a great choice.

With its advanced Xenonlook technology, superior lifespan and easy installation, this halogen bulb gives you better visibility and increased safety when you're on the move.

HB3/9005 LED conversion kit by Ledson LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

LED HB4/9006 conversion kit by Ledson LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

HB3/9007 LED conversion kit by Ledson LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

LED HIR2 conversion kit by Ledson LEDSON

The Ledson bulb has a colour temperature of 6000K and a light temperature of 2250lm

It has a voltage of 9-32v

Equivalent to 75W

Two lamps for Scania Series 4 and Series R DRL. Can also be installed on the other lamp. The size is OEM so no modifications are necessary

Replaces dipped headlights during the day

Integrated position light with automatic ignition

suitable for DRLs

Fuel economy: Consumes 13W compared to the original 140W

Unbeatable life: High-quality Philips diodes

ECE E4 R87 approved

Scania is a registered trademark, any use of the word is for reference purposes only. This product is not original and is not manufactured by Scania. The use of the brand word means only that the product is suitable for a particular brand

Replaces high beam and/or DRL

Gives a retro, yellow look

suitable for DRLs

Fuel saving: Consumes 13W compared to the original 140W

Unbeatable life: High-quality Philips diodes

ECE E4 R87 approved

Scania is a registered trademark, any use of the word is for reference purposes only. This product is not original and is not manufactured by Scania. The use of the brand word means only that the product is suitable for a particular brand

Reversing light with warning indicator

Consists of a side-reflecting optical system

ETM (electronic thermal management)

Wide light beam: 80° and 60

Lumen: 2700 lm

Kelvin: 6000K

Voltage: 9-36v

Width: 164mm

Height: 41mm without stand

Depth: 61mm

DT connector

Supplied with bracket for standing/suspended and flush mounting

ECE R23, R65, R10 CISPR25 class 3 approved

Stone chip protection for Ledson Sarox 7+, Castor 7 and Castor 7+ road headlights

Protects against stone chips and scratches

Does not affect the light beam

Stone chip protector for Ledson Orion 10+ and Libra 10+ headlamps

Protects against stone chips and scratches

Does not affect the light beam

Stone chip protection for Ledson Pollux 9/9+ and Sarox 9+ high beam headlamps

Protects against stone chips and scratches

Does not affect the light beam

Yellow filter/snow filter for Ledson Sarox 7+, Castor 7 and Castor 7+ headlights

Provides more optimum light in snowy conditions

Yellow filter/snow filter for Ledson Orion 10+ and Libra 10+ headlights

Provides more optimum light in snowy conditions

Yellow filter or snow filter for Ledson Pollux 9 and Pollux 9+ and sarox 9+ headlamps

Provides more optimum light in snowy conditions

The filter provides a styling effect with the yellow position light

Switch for high beam 12 V and max 6A with indicator light.

integrated indicator mounted in 20mm hole

With high beam symbol

Also available with other symbols

Available in 24v

Switch for high beam 24V and max 6A with indicator light.

integrated indicator mounted in 20mm hole

With high beam symbol

Also available with other symbols

Available in 12v

Ledson Hydra work light

The Ledson Hydra worklight has electronic heat management

The Ledson Hydra worklight has a luminous flux of 5600lm and a luminous temperature of 5700K

Dimensions of the Ledson Hydra worklight

1. Length: 137mm
2. Height: 125mm
3. Depth: 68mm

ECE R10 and IP69K approved

dynamic indicator module (two pieces)

500mm cable

Indigate for 12 lights

Can handle up to 6 lights per module

Amperage for 1 module: 5A per module

Voltage: 12-24v (max 40v)

Dimensions: 47.5mm X 26.6mm X 23.9mm

Approved: IP67

dynamic indicator module (two pieces)

500mm cable

Indigate for 8 lights

Can manage up to 4 lights per module

Amperage for 1 module: 5A per module

Voltage: 12-24v (max 40v)

Dimensions: 47.5mm X 26.6mm X 23.9mm

Approved: IP67

Switch for interior light 12 V and max 6A with indicator light.

integrated indicator mounted in 20mm hole

With interior light symbol

Also available with other symbols

Available in 24v

Switch for indoor light 24V and max 6A with indicator light.

integrated indicator mounted in 20mm hole

With interior light symbol

Also available with other symbols

Available in 12v

Fits behind the number plate

Matt paint

perfect for Orion or Libra headlights

for three main beam headlights up to 250 mm in diameter

Fits behind the number plate

Matt paint finish

For three main beam headlamps up to 230 mm in diameter or one LED bar

Length: 745mm

height: 85mm

Depth: 65mm

Fits behind the number plate

Matt paint finish

Perfect distance for 7" road lights

Designed for 4 lights with a maximum diameter of 195mm

Width: 745mm

Height: 85mm

Depth: 65mm

Fits behind the number plate

matt paint

Designed for one LED strip or 4 lights up to 235mm in diameter

Length: 745mm

Height: 85mm

Depth: 65mm

360 degree cool white LED bulb

Ledson bulb with 18 diodes

The plug is BA15s (also known as P21W)

Voltage 12v

Equivalent to 20w

Sold in packs of 2

360 degree cool white LED bulb

Ledson bulb with 18 diodes

Socket is BA15s (also known as P21W)

Voltage 24v

Equivalent to 20w

Sold in packs of 2

Bulb LED BA15s blue 12v

The Ledson bulb has a BA15s socket (R5W)

It is equivalent to 5w

The dimensions of the Ledson bulb are:

1. length: 34mm
2. diameter 16mm

The Ledson Led bulb is suitable for parking lights, lighting and interior lighting

Model also available in 24v

Led bulb BA15s blue 24v

The Ledson bulb has a BA15s socket (R5W)

It is equivalent to 5w

The dimensions of the Ledson bulb are:

1. length: 34mm
2. diameter 16mm

The Ledson Led bulb is suitable for parking lights, lighting and interior lighting

Model also available in 12v

LED bulb BA15s white 12v

The Ledson bulb has a BA15s socket (R5W)

It is equivalent to 5w

The dimensions of the Ledson bulb are:

1. length: 34mm
2. diameter 16mm

The Ledson Led bulb is suitable for parking lights, lighting and interior lighting

Model also available in 24v